The Cidora SL5 V2.1 HD w/ FPV Air Unit BNF features the amazing new digtal FPV system, this quad makes flying FPV truly breathtaking.
This frame offers a squashed X layout for maximum control,
equipped SucceX-D F7(50A 4-in-1 ESC) stack and popular XING motors.
Everything you need to bind and fly!
Optimized weight distribution: fpv air unit and stack centered
SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack
Buttery-smooth 720p 120fps FPV feed
Pre-tuned with smooth freestyle settings
Full 3K Carbon Fiber airframe with chamfered arms
LED illuminated Logo
PRE-TUNED & PRE-SETUP:
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check iflight article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check iflight article on "How to disable Angle-Mode, activate Acro-Mode"
- Body dimension: 166*139mm
- Frame Wheelbase: 217mm
- Bottom to top distance: 28mm
- Arm thickness: 5.5mm
- Bottom plate thickness: 2.5mm
- Top plate thickness: 2mm
- Upper(middle) plate thickness: 3mm
- Camera plate thickness: 2.5mm (included TPU inserts)
- SucceX-D F7 TwinG V2.1 FC
- SucceX 50A 2-6s BLHeli32 4-in-1 ESC Dshot1200
- XING unibell 2207 2450kv motor
- Weight: 445.4g (without battery and HD camera mount)
1x SL5 V2.1 4S HD Drone BNF
2 sets x Nazgul 5140 props(Set of 4 - Color vary)
2x lipo strap tie
1x TPU bottom stand incl. lock screw
NOTE: The Hero9 camera and TPU camera mount not include.
Recommend Parts (not included):
4S 1300mAh to 2000mAh lipo
3D Printed Camera Mount for Hero 5/6/7/8/9
FPV remote controller for DJI
FPV Goggles for DJI
Make sure this fitsby entering your model number.
SL5 V2.1 FPV HD drone BNF built with FPV Air Unit 4s fpv drone features the amazing digtal FPV system for DJI ,HD image quality.Weight 445.4g without battery.
NEW squashed X frame to get the best performance for freestyle,5.5mm arms ,more durable,360° TPU protection and antenna mounts,with TPU bottom stand mount.
5inch HD fpv drone bnf design for professional pilot,recommended:4s 1050mAh to 2000mAh battery(not included) .
Latest high performance SucceX-D F7 (50A 4-in-1 ESC) tack and our popular XING Unibell 2207 2450kv fpv racing motors
Note: 1.please read manual carefully. 2.only suit for dji fpv remote controller for dji fpv goggles.3.when you have any question,please feel free contact us at any time!