In Service Since 2006
YOUR TRUSTED RESOURCE FOR RC MODELS

iFlight Chimera7 HD FPV Racing Drone 320mm 7inch 6S LR Drone with Air Unit for DJI, BNF with SucceX-D F7 V2.1 50A Stack 2806.5 1300KV/1800KV Motor (with Receiver for TBS Nano,2806.5 1300KV Motor)

Amazon.com Price: $829.98 (as of 06/10/2021 09:14 PST- Details)

Make sure this fitsby entering your model number.
Introducing what has been requested for too long already! A super efficient iFlight 7inch Long-Range bird that can go where you couldn't go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.
Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above.

Color:With Receiver for Tbs Nano | Size:2806.5 1300KV Motor

HIGHLIGHTS:
6mm rigid arm design for more stiffness
XING 2806.5 efficient wide stator motors
GPS pre-installed for more safety at distance
TPU bottom stand for GoPro(protector for GoPro not included)
360° TPU protection, cam protection and antenna mounts for DJI
FPV Air Unit for DJI, buttery-smooth 720p120fps FPV feed(TPU soft mounted) 
No props in view(Air unit for DJI record in 1080p/60fps)
Battery voltage LED status light (illuminated IF logo on the bottom

FRAME
Wheelbase:320mm
Bottom to top distance:20mm
Arm thickness:6mm
Bottom&Upper(middle)plate thickness: 3mm
Top plate thickness:2mm
Camera plate thickness:3mm(included TPU inserts)

SucceX-D F7 V2.1 TwinG
MCU:216MHz STM32F722
Gyro:2x ICM20689
Baro:YES
Blackbox:32MB
Betaflight OSD:YES
BEC:5V 2.5A/9V 2.5A
Current sensor scale:100
Inverter for SBUS input(UART2-RX)
Smartaudio&Tramp VTX protocol supported
Beeper pad:Yes
UARTs:5
8 pin 4in1 ESC port(GND,VBAT,M1,M2,M3,M4,CUR,R5)
6 pin Air Unit port for DJI(R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry:RX5
Input voltage:recommended 2-6S, MAX 8S
Firmware Target:IFLIGHT_F722_TWING

ESC//SucceX 50A
MCU:STM32F051
Up tp 48kHz PWM frequency
Capacitance:470uF/50V
Current Sensor:Yes
Input:2-6S LIPO
Constant:50A/Burst:60A
BlHeli32 telemetry:Yes
Supports up to Dshot1200,Proshot,Oneshot,Multishot 
Target: iFlight-BL32-4IN1

Parts list (Build):
1xChimera7 frame
1xTPU bottom stand incl. lock screw for GoPro
1xFPV camera for DJI
1xFPV Air Unit Module for DJI
2xAlbatross LHCP RP-SMA 5.8g 150mm antenna
2setsxGemfan tri-blade 7040 props(Set of 4-Color may vary)
4x20*250mm Microfiber PU Leather Battery Strap(Color May Vary)

Make sure this fitsby entering your model number.
Introducing what has been requested for too long already! A super efficient iFlight 7inch Long-Range bird that can go where you couldn't go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.
Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above.
GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends just in case.
Additional Suggested Parts (not included): Adjustable mount for GoPro (0-40); 1300KV  Cruiser, suggested battery: 6S 4000mAh; 1800KV Speed Cruiser, suggested battery: 6S 2600mah

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram