In Service Since 2006
YOUR TRUSTED RESOURCE FOR RC MODELS

iFlight Chimera4 Analog 4S FPV LR BNF FPV Drone 178mm Camera 4inch SucceX-E F4 V2.1 FC Built-in 35A 4-in-1 ESC 1404 Motor FPV Racing Drone (with Receiver for TBS Nano,3800KV Motor)

Amazon.com Price: $305.99 (as of 06/10/2021 09:14 PST- Details)

Make sure this fitsby entering your model number.
Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow crusing or speedy action, theres something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!
GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way! Caddx.us Turbo Eos V2 2.1mm lens 16:9 NTSC camera, Custom iFlight 160mm LR antenna for best signal coverage even at long distance.

Color:With Receiver for Tbs Nano | Size:3800KV Motor

HIGHLIGHTS:
Sub 250g long-range quad
XING 1404 3000KV(Cruiser) or 3800KV (Speed Cruiser) Ultralight motors (Optional)
(Camo or black color motor is random, If you have special request, please leave a message after placing order)
X-Geometry body for high performance handling and max. authority on pitch axis
DC(DeadCat geometry)bottom plate available(additional item,no props in view) 
GPS pre-installed for more safety at distance
SucceX-E mini F4 +35A 4in1 ESC Flystack
Naked ready for GoPro
360° TPU protection, FPV cam protection and antenna mounts
Caddx.us Turbo Eos V2 2.1mm 16:9 NTSC

SucceX-E mini F4
MCU: 168MHz STM32F405
Gyro: MPU600
Blackbox: 8MB
Betaflight OSD: YES
BEC: 5V 2.5A
Uarts: 4
ESC Telemetry: yes
INA Pad: nuart2
Input voltage: 2-6S
Firmware: BETAFLIGHTF4
NOTE: F.PORT protocol RX input support, telemetry not supported. 

SucceX-E mini 35A 
MCU: BB21 F16G
BLHeliS
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 35A / Burst: 40A
BEC: No
Supports up to Dshot600, Proshot, Oneshot, Multishot 
Target: G-H-30

VTX//SucceX-Force adjustable
Input voltage: 5V
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW?250mA@400mW, 380mA@800mW
PIT/25/200/400/800mW

Parts list (Build):
Prebuilt and indoor tested Quadcopter
1x Chimera4 frame
2x Albatross RHCP ipex 160mm antenna
Caddx.us Turbo Eos V2 2.1mm 16:9 NTSC
SucceX Force 5.8GHz 800mW VTX Adjustable
2setsx Nazgul 4030 props (Set of 2 - Color may vary)
2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)

Make sure this fitsby entering your model number.
Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow crusing or speedy action, theres something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!
GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way! Caddx.us Turbo Eos V2 2.1mm lens 16:9 NTSC camera, Custom iFlight 160mm LR antenna for best signal coverage even at long distance.
Additional Suggested Parts (not included)?  4S 850mAh/ 4S 1100mAh;  TPU Naked Mount for GoPro;  1404 3800KV motor, suggested battery: 4S 650maa-850mah, Flight times about 5-10 minutes, and the flight can do actions;  1404 3000KV motor, suggested battery 4S 850-1100mah, Flight times about 10-15 minutes.

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram